CALL/TEXT (979) 739-4064 OR EMAIL KEITH@DASHDRILLING.COM
CALL/TEXT (979) 739-4064 OR EMAIL KEITH@DASHDRILLING.COM
So we called around and found that there was no place ABOVE ground to do it.
So we created it!
Full Downhole Tool Life Testing with Real Loads / Fluids / Cycles / Longevity
Real Data Collection with Vibration / Temperature / Output HP / Pressures / RPM
3600 HP of Triplex Pumps
Mud Tanks / Mud Mixing
Top Drive
Lights for 24/7
Flexible Data Collection
Sensors In or Out of Tool
Remote Control
Cloud Storage of Data
Virtually any Measurement Devices
Huge Number of Inputs / Outputs
Computer Controlled Oscillation of the Tool
2000 HP Continuous Brake
ON/OFF Bottom WOB
Radial Bearing Sideload
Real Time Torque & RPM
Temperature Control
The Ultimate Dyno can load test tools up to 24" Diameter and 100 feet long continuously for hundreds of hours.
Flow ranges 0-1,250 gpm
5,000 psi Max
Test Tools with up to 50,000 ft-lbs or 2,000 HP Continuously
Auxiliary Cooling System for all Fluids
Up to 80,000 lbs dynamic weight on bit (Constant or Oscillating)
Up to 80,000 lbs dynamic off bottom pull on bit (Constant or Oscillating)
0-25,000 lbs tool side load (Constant or Oscillating)
Downhole sequencing available
Oil or Water based fluids with mud mixing on site.
Contaminants can be added to the flow loop (sand, salt, polymers, lcm).
Wide range of available sensors for parameters like
RPM / Torque / Mud flow / vibrations / Loads, etc.
Data is stored at the desired frequency in a database for further analysis
Bit pressure Drop
Mud Flow Bypassed Through Bearings
Tool RPM
Tool Torque
Weight on /off Bit
Side Load
Test Fluid temperature
Pressure at start of tool
Pressure at end of tool
Brake Fluid Temperature
Tool OD Vibration
Mud Flow to Tool
Copyright © 2023 Dash Drilling Products, LLC - All Rights Reserved.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.